Saturday, August 26, 2017

Newborn Spiral Hat Pattern
























Hook Size: G/6 - 4.25mm

Yarn - Red Heart Super Saver in Soft Grey (MC) and Teal (CC)




Using CC, make a magic ring

Rnd 1: Ch 2, 11DC into ring, draw up a loop of MC and slip stitch in top of 1st DC to join (12DC)

Rnd 2: Ch 1, switch to CC, Ch 1 and FPDC around 1st DC, switching colours for the last loop of the DC. DC in top of next DC, switch colours on the last loop again and FDPC around the same DC. Continue around the circle changing yarns on the last loop of every stitch. Slip stitch to join in top of 1st FPDC using MC. All FPDC should be in the CC and all DCs in MC. (24DC including starting Ch2)

Change colours on the last loop of the FPDCs and on the last loop of the last DC before a FPDC. 

Rnd 3: Ch 2 using MC, and DC in same space (not in top of FPDC) *FPDC around FPDC, 2 DCs in top of next DC; rep from * around, slip stitch in top of 1st DC (36 DC)

Rnd 4: Ch2, 2 DC in same space, *skip next DC and FPDC around next FPDC, 3 DC top of next DC; rep from * around (48 DC) Should look like the photo with 3DC shells between each FPDC.

Rnds 5-10: Ch2, 2DC in same space *skip next 2 DCs and FPDC around next FPDC, 3 DC top of next DC; rep from * around (48 DC)

Rnd 11: Using CC, Ch1, SC in top of next 2 DCs, *FPSC around FPDC, SC in top of next 3 DCs; rep from * around. Slip stitch and fasten off, weave in ends.












Granny Square Style Baby Hat





This hat has a solid double crochet circle at the top with granny square shells on the sides. The brim is ribbed and finished off with a row of single crochet stitches. It should fit about a 6 month old and make a cute winter hat for a baby boy.


Hook Size: G/6 - 4.25mm

Yarn - Red Heart Super Saver in blue and soft white


Start with magic ring.

Rnd 1: Ch2, 11DC in ring and slip stitch in top of 1st DC, pull tail to close ring (12DC)

Rnd 2: Ch2, 1DC in same space then 2DC in each DC around, slip stitch to join (24DC)

Rnd 3: Ch2, *2DC in next DC, 1DC in next DC; rep from * around, slip stitch to join (36DC)

Rnd 4: Ch2, DC in next DC, *2DC in next DC, 1DC in each of next 2 DCs; rep from * around, slip stitch to join (48DC)

Rnds 5-10: Ch2, 2DC in same space, *skip 2DC, 3DC in next space; rep from *around, slip stitch to join (48DC)

Rnd 11: Using white yarn: Ch2, BPDC around each DC around, slip stitch to join (48DC)

Rnd 12: Continue with white: Ch2,  FPDC around next DC, DC in top of next DC around, slip stitch to join (48DC)

Rnd 13: Using blue: Ch 1, SC in top of each DC around, slip stitch and fasten off.



Tuesday, August 15, 2017

Baby Halloween Beanie Hat






Hook - G/6 - 4.25mm

CC1 - Black
CC2 - Orange


CH - Chain
DC - Double Crochet
FPDC - Front Post Double Crochet
SC - Single Crochet
FPSC - Front Post Single Crochet

SS - Slip Stitch


Start with CC1 and make a magic ring.

Rd 1: CH 2 and make 11 DC in ring, pull magic ring closed. Using CC2, SS the round closed through the top of the first DC - 12DC (The CH2 at the start of each round counts as a DC throughout this pattern)

Rd 2: CH 1 in CC2 and use CC1 for the 2nd CH 1. FPDC around the first DC using CC2 to pull through the last two loops of the FPDC. DC in the top of the next DC, change colour again on the last part of the DC, FPDC around the same DC. Continue around the circle so you have 1DC in CC2 followed 1FPDC in CC1. SS in top of first FPDC - 24DC (12 of each colour - see photos pink=black and white=orange)



Note: The CH2 at the beginning of each round is always in 2 colours (1CH CC2 followed by 1CH in CC1) until you reach the brim of the hat where it's all in CC2. The SS to close each round is always in CC1. The FPDC should be in CC1 and the DCs in CC2. Change colours on the last loop of the FPDCs and on the last loop of the last DC before a FPDC.
Rd 3: CH 2 and *FPDC around FPDC of previous rd, DC in top of DC and DC in top of next FPDC; repeat from * around then SS in top of first FPDC - 36DC
Rd 4: CH 2 and *FPDC around FPDC of previous rd, DC in top of next 2 DCs, DC in top of next FPDC; repeat from * around then SS in top of first FPDC - 48DC

Rds 5-11: CH 2 and *FPDC around FPDC of previous rd, DC in top of next 3 DCs; repeat from * around then SS in top of first FPDC - 48DC

Note: Rows 5-11: Don't DC in the top of the FPDC since we don't want to continue the increase. Maintain 3 DCs between each FPDC.

At the end of Rd 11 we no longer need CC2 so it can be cut and secured.

Rd 12: (All stitches in CC1) CH1 and *FPSC around FPSC of previous rd, SC in top of next  3 SC; repeat from * around then SS in top of first FPSC and Fasten off - 48SC


I hope you enjoyed this pattern.


Two colour Vertical Ribbed Newborn Hat Pattern









Hook - G/6 - 4.25mm

CC1 - light pink
CC2 - soft white


CH - Chain
DC - Double Crochet
FPDC - Front Post Double Crochet
SC - Single Crochet
FPSC - Front Post Single Crochet
SS - Slip Stitch




Start with CC1 and make a magic ring.

Rd 1: CH 2 and make 11 DC in ring, pull magic ring closed. Using CC2, SS the round closed through the top of the first DC - 12DC (The CH2 at the start of each round counts as a DC throughout this pattern)

Rd 2: CH 1 in CC2 and use CC1 for the 2nd CH 1. FPDC around the first DC using CC2 to pull through the last two loops of the FPDC. DC in the top of the next DC, change colour again on the last part of the DC, FPDC around the same DC. Continue around the circle so you have 1DC in CC2 followed 1FPDC in CC1. SS in top of first FPDC - 24DC (12 of each colour - see photos)




Note: The CH2 at the beginning of each round is always in 2 colours (1CH CC2 followed by 1CH in CC1) until you reach the brim of the hat where it's all in CC2. The SS to close each round is always in CC1. The FPDC should be in CC1 and the DCs in CC2. Change colours on the last loop of the FPDCs and on the last loop of the last DC before a FPDC. 

Rd 3: CH 2 and *FPDC around FPDC of previous rd, DC in top of DC and DC in top of next FPDC; repeat from * around then SS in top of first FPDC - 36DC

Rd 4: CH 2 and *FPDC around FPDC of previous rd, DC in top of next 2 DCs, DC in top of next FPDC; repeat from * around then SS in top of first FPDC - 48DC

Rds 5-9: CH 2 and *FPDC around FPDC of previous rd, DC in top of next 3 DCs; repeat from * around then SS in top of first FPDC - 48DC

Note: Rows 5-9: Don't DC in the top of the FPDC since we don't want to continue the increase. Maintain 3 DCs between each FPDC.

At the end of Rd 9 we no longer need CC2 so it can be cut and secured.

Rd 10: (All stitches in CC1) CH2 and *FPDC around FPDC of previous rd, DC in top of next DC, FPDC around next DC, DC in top of next DC; repeat from * around then SS in top of first FPDC - 48DC

Rd 11: CH2 and *FPDC around FPDC of previous rd, DC in top of next DC; repeat from * around then SS in top of first FPDC - 48DC

Rd 12: CH1 and *FPSC around FPSC of previous rd, SC in top of next SC; repeat from * around then SS in top of first FPSC and Fasten off - 48SC


I hope you enjoyed this pattern.





Friday, August 11, 2017

Vertical Ribbed Newborn Baby Hat Crochet Pattern


Newborn baby hat Pattern







Hook - G/6 - 4.25mm

Yarn - Red Heart Super Saver in Orchid - Medium weight 4


CH - Chain
DC - Double Crochet
FPDC - Front Post Double Crochet
BPDC - Back Post Double Crochet
SS - Slip Stitch

Start with a magic circle.

Rd 1: CH 2 and make 11 DC in ring, pull circle closed and SS in top of first DC - 12DC

Rd 2: CH 2 and FPDC around first DC (the chain 2 on the previous round) *DC in the top of the next DC then FPDC around the same DC; repeat from * around  then SS in top of first FPDC - 24DC

Rd 3: CH 2 and *FPDC around FPDC of previous rd, DC in top of DC and DC in top of next FPDC; repeat from * around then SS in top of first FPDC - 36DC

Rd 4: CH 2 and *FPDC around FPDC of previous rd, DC in top of next 2 DCs, DC in top of next FPDC; repeat from * around then SS in top of first FPDC - 48DC

Rds 5-10: CH 2 and *FPDC around FPDC of previous rd, DC in top of next 3 DCs; repeat from * around then SS in top of first FPDC - 48DC

Rd 11:  CH2 and BPDC around each DC/FPDC around, SS in top of first BPDC

Rds 12 & 13: CH2 BPDC around each BPDC around, SS in top of first BPDC and fasten off.
























Two colour hat






CC1 - light pink
CC2 - soft white

Start with CC1 and make the magic ring and Rd 1. Use CC2 to slip stitch Rd 1 Closed.

Rd 2: chain 1 in CC2 and use CC2 for the next chain and 1st FPDC but use CC1 to pull through the last two loops of the FPDC, change again on the last two loops of the DC. The FPDC should be in CC1 and the DCs in CC2.





























I hope you like my pattern. I'm new at writing patterns so feedback is welcome. Please give me credit if you use my pattern :-)